Page Comparison

Step by step instructions for building and deploying the SSP 2.0-b2 release.

1. Software Prerequisites (JDK, Tomcat, Maven, Ant, RDBMS)
2. SSP Platform build and deployment

...

Anchor
Software Pre-reqs Software Pre-reqs

Software Prerequisites

The following software prerequisites must be installed with the appropriate environment variables to build and run SSP:

...

...

Anchor
SSP-Platform Build SSP-Platform Build

Configure and Deploy SSP-Platform

The following configurations are required to build and deploy SSP-Platform.

1. Download the SSP-Platform Release

2. SSP Configuration Files

• Create a directory for the local SSP configuration files
  
  • Example:
    
    • Unix/Linux/Mac example: /usr/local/ssp

    • Windows example: C:\ssp\ssp-local

  • Make the directory only readable by the user that is running Tomcat

  • Set an Environment Variable for the local configuration file location

    Tip
    SSP_CONFIGDIR=/path/to/your/local-configuration (ie: /usr/local/ssp/ssp-local or C:\ssp\ssp-local)

• ssp-config.properties
  
  • The ssp-config.properties file must be modifed for database connectivity and email settings
  • File Location: github

  • Action: create the  ssp-config.properties file in the local configuration directory (ie: C:\ssp\ssp-local)

    • • Configuration Values:

        Value	Description	Note
        system_id	Unique identifier of the SSP instance
        db_

    urljdbc connection syntaxFor Microsoft SQL Server, either specify a port (the default is 1433) or ensure that the SQL Server Browser service is running because the SQL Server JDBC driver defaults to port 1434 which is the SQL Server Server Browser service default port. Depending on the server configuration, either may work, or you may want to explicitly specify the port and instance name, if applicable.db_driver_classjdbc database connectivity syntax db_dialectHibernate dialectUse of one of the org.jasig.ssp.util.hibernate.ExtendedSQLServer*Dialects is strongly encouraged if running against SQLSever. The default ssp-config.properties has an example.)db_usernameValues for connecting to the SSP database db_passwordValues for connecting to the SSP database db_admin_usernameValues for connecting to the SSP database db_admin_passwordValues for connecting to the SSP database db_nameValue for the SSP database 

    • • username	Values for connecting to the SSP database
        db_password	Values for connecting to the SSP database
        db_admin_username	Values for connecting to the SSP database
        db_admin_password	Values for connecting to the SSP database
        db_name	Value for the SSP database
        db_url	jdbc connection syntax	For Microsoft SQL Server, either specify a port (the default is 1433) or ensure that the SQL Server Browser service is running because the SQL Server JDBC driver defaults to port 1434 which is the SQL Server Server Browser service default port. Depending on the server configuration, either may work, or you may want to explicitly specify the port and instance name, if applicable.
        db_driver_class	jdbc database connectivity syntax
        db_dialect	Hibernate dialect	Use of one of the org.jasig.ssp.util.hibernate.ExtendedSQLServer*Dialects is strongly encouraged if running against SQLSever. The default ssp-config.properties has an example.)
        db_conns_max_active	Values for the database connection pool	The default value will need to be increased for test and product
        db_conns_max_idle	Values for the database connection pool	The default value will need to be increased for test and product
        db_conns_max_wait	Values for the database connection pool
        db_conns_validation_query	Values for the database connection pool
        db_liquibase_enabled	Enables the liquibase script for database table management
        db_liquibase_changelog	Location for the liquibase change log
        db_liquibase_set_mssql_snapshot_isolation	Parameter for configuring a MSSQL database	IMPORTANT The default value is 'true'.  Set this value to 'false for MSSQL.  The liquibase changeset 000014.xml will be ignored.  The sql above configures the database correctly.
        db_liquibase_strip_journal_comment_markup	Parameter to enable a script to convert HTML Journal Entries to plain text
        db_liquibase_strip_tuition_paid_is_y	True value will delete the existing values forced into the database in v1.2.0, False will leave the existing values alone	This only applies to implementers who installed v1.2.0 or earlier AND populated the external_registration_status_by_term.tuition_paid field with external data
        db_liquibase_convert_external_term_timestamps	True value in external_term.start_date and external_term.end_date will be interpreted in ${db_time_zone_legacy} and re-written in ${db_time_zone_legacy}.	True usually makes sense for both upgrades and fresh installs. Would only set to false if for some reason these fields have already been converted to ${db_time_zone) via some external process.
        db_batchsize	The number of records to process for database transactions.	The default value is 300.  Use of the parameter can increase performance of queries writing large sums of data into the database.  This is primarily used in the Caseload Re-assignment tool.
        cacheLifeSpanInMillis	This property will dictate how long lived a cache will be only external courses uses a cache	default is 86400000 = 1 day
        db_time_zone_legacy	Parameter to set the timezone for data migration	Used for migrating persistent timestamps. Prior to work on SSP-1002, SSP-1035, and SSP-1076, timestamps were stored in the JVM default timezone.  After that the application assumes they are stored in ${db_time_zone}. In order to correctly migrate existing data, though, the app needs to know the original timezone. This is almost always going to be the current JVM default timezone, hence the default value here, which is a special value instructing the app to lookup and inject that timezone into this config property. In the rare event you need to change that value, you can do so here. This would likely only be necessary if, for whatever reason you change the JVM default *after* the migrations run, which would result in a Liquibase checksum error. To avoid that, just set the relevant timezone here when and if you make that change. Default is CURRENT_JVM_DEFAULT
        db_time_zone	Timezone ID for the JVM	JVM-recognized TimeZone ID for the zone in which persistent date/time values should be interpreted. Should rarely if ever need to be overridden. If overridden, should always be set to a TimeZone that does not observe Daylight Savings Time unless trying to cope with legacy data that was stored in a DST-aware TimeZone. Once set, should never be changed else date/time values in the database will be interpreted incorrectly. (SSP does not store timezone data on persistent date/time values and implements no logic for  detecting and/or handling changes to this configuration option.) Default is UTC
        smtp_username	Value for email relay
        smtp_password	Value for email relay
        smtp_host	Value for email relay
        smtp_port	Value for email relay

     

    • • smtp_protocol	Protocol for email	Default is smtp
        ssp_admins_email_addresses	Recipient of system generated messages
        scheduled_coach_sync_enabled	Parameter to enable coach sync process
        per_coach_sync_transactions	Parameter to enable the sync process to run per coach instead of one large transaction for all coaches
        scheduled_task_cleanup_wait_millis	Max amount of time, in milliseconds, the app will wait during shutdown for any background tasks to abandon their work.	Default is

    10000

    • • 10000
        uportal_session_keep_alive_timeout	Length of time for uPortal sessions KeepAliveFilter
        spring.profiles.active	Deployment options	dev-standalone: completely free of uPortal standalone: as the only portlet in a uPortal instance uPortal: as one of many portlets in a uPortal instance
        ssp_main_use_minifed_js	Parameter to determine the javascript file used in the deployment	When set to true, ssp-main.jsp will include a minified js called app-all.js When set to false, ssp-main.jsp will include the non-minified app.js

    uportal_session_keep_alive_timeoutLength of time for uPortal sessions KeepAliveFilter spring.profiles.activeDeployment options
    • dev-standalone: completely free of uPortal
    • standalone: as the only portlet in a uPortal instance
    uPortal: as one of many portlets in a uPortal instance

logback.xml

• The logback.xml controls the log location and level
• File Location: github

• Action: create the  logback.xml file in the local configuration directory (ie: C:\ssp\ssp-local)

• Configuration Values: property file
  
  

...

• Additional configuration options
  
  • Adjust the log levels for each log appender as necessary
  • Enable the smtpAppender (disabled by default)
  • Further details regarding managing the logback.xml are included in XML comments within the file

3. Modify SSP-Platform Configuration Files

• build.properties
  
  • The build.properties.sample file is copied or renamed in the current directory.  The parameter defines the location of Tomcat.
  • File Location: (uPortal-ssp-1-1-0)
  • Configuration Values: server.home parameter

...

• pom.xml (For Microsoft SQL  only)
  

  • JDBC driver for SSP-Platform if not using PostgreSQL

    Warning
    The pom.xml should only be changed with extreme care.  The Microsoft SQL Server jdbc driver needs to be identified in the build.  The parameter defines the location of the driver in the local repository.

  • File Location: (uPortal-ssp-1-1-0)

  • Configuration Values: parameters

  • Action: modify the existing parameters defined for PostgreSQL
    
    

    Code Block
    title JDBC driver identified in the pom.xml
    <!-- The JDBC Driver used by SSP --> <jdbc.groupId>net.sourceforge.jtds</jdbc.groupId> <jdbc.artifactId>jtds</jdbc.artifactId> <jdbc.version>1.2.4</jdbc.version>

• local.properties
  
  • The local.properties file must be modifed for database connectivity and email settings
  • File Location: (uPortal-ssp-1-1-0)/filters

  • Configuration Values:

  Value	Description
  environment.build.hibernate.connection.driver_class	jdbc driver file
  environment.build.hibernate.connection.url	jdbc connection syntax
  environment.build.hibernate.connection.username	jdbc connection database username
  environment.build.hibernate.connection.password	jdbc connection database password
  environment.build.hibernate.dialect	jdbc connection dialect

4.  Build SSP-Platform

• Use the following command to build, deploy, and initialize the SSP-Platform project:
  
  

...

• Restart Tomcat

5. Test Deployment

• Start Tomcat and point your browser to http://localhost:8080/ssp-platform
  Click Sign In, and use the credentials user: admin password: admin

6. Production Deployment Tips

• Warning
  title Delete Demo Users
  If you are deploying to a production environment, you should delete or change the passwords for the uPortal users created for demonstration purposes, including the admin user. This can be done through the user interface: Manage Users ->  Find an Existing User -> [Enter user ID from list below] -> [Click result] -> Delete or Edit, then change password. Demo users: admin advisor0 ken student0 student1

...